"CONTAINS NO WATER"

Screenpro's Paint & Epoxy Remover is a low toxicity, biodegradable solvent designed to remove paint, epoxy, powder coating, ink, carbon, smut and grease from a variety of surfaces. P&ER is also an employee-safe product that will prevent Worker's Compensation claims usually associated with the use of dangerous industrial chemicals. Screenpro Paint & Epoxy Remover is employed as a chemical reaction medium, a selective solvent, and a versatile formula agent for coatings, strippers, and cleaning equipment.

Screenpro Paint & Epoxy Remover is an Industrial strength cleaner that was designed to do the impossible jobs. With its high flashpoint and low toxicity, it replaces halogenated compounds like DMG, acetone, chlorofluorocarbon, freon, 1,1,1-trichloroethylene, and methylene chloride.

Screenpro's Paint & Epoxy Remover is essentially non-corrosive and a very stable chemical under normal conditions. It has outstanding cleaning ability at room temperature, boils at 395 F, freezes at -12 F and has a closed cup flashpoint of 199 F. P&ER is completely miscible with water and most organic solvents, including alcohols, ethers, ketones, aromatic and chlorinated hydrocarbons, and vegetable oils. A slight color is normal.

Screenpro's Paint & Epoxy Remover is a hybrid solvent that is designed to remove urethane foam and coatings from molds, ink from printing equipment, and grease from metal. Also cleans rubber and plastic molding equipment. Aggressively attacks vinyl, epoxy adhesives, polyester, nylon and viton, and removes oil, carbon and smut. In the electronics industry, P&ER removes flashing type compounds, solder mask and solder paste associated with printed circuit boards. P&ER will also remove multiple layers of cured powder coating instantly when heated.

Screenpro's Paint stripper and Epoxy Remover removes powder coating. When the epoxy remover is heated, its cleaning ability is accelerated 100 times, reducing cleaning time enourmously.

For best results Screenpro P&ER should be used as received; however, it can also be diluted with water. P&ER should be used at temperatures between 70 and 85 F. However, accelerated cleaning can be achieved by heating to 150 F. P&ER is safe for use with equipment constructed of polyethylene and polypropylene.

Screenpro P&ER can be wiped on with a cloth or applied directly to the surface being cleaned with a spray bottle. Allow it to soak for 45 to 90 seconds, then rinse with a water spray or wipe with a damp cloth. For production cleaning, a Screenpro Auto Washer, wash out sink or dip tank is available.

Although human patch tests indicate the material is mild to the skin, repeated or prolonged skin contact should be avoided. We strongly recommend the use of gloves and safety glasses while using this product. It is a severe eye irritant and should not be ingested. Inhalation tests indicate no special hazard. Normal good practices for handling all chemicals to avoid unnecessary exposure should be followed.

Cover all other nearby painted or finished surfaces with heavy paper or cardboard. Accidental spillage or spraying will result in stripped or marred surfaces.

P&ER is shipped in 55 gal. (460 lb) drums and 4 gallon cases.

P&ER is a stable compound but it is dygroscopic. Therefore, shipping and storage containers should be stored in a dry area, sheltered from the weather, between 50 and 90 F. Some discoloration may occur with long term storage. Shelf life is 6 months.

P&ER is drain safe out of the bottle. When combined with toxic products it is no longer drain safe and must be disposed of as hazardous waste. Screenpro Washers recycle and filter, eliminating the disposal of contaminated cleaner.

Try our convenient 1-Gallon trial size $75/gal.* (plus UPS Shipping)
* Unfortunately, our minimum order is $200 dollars. We can not just ship one gallon.
  You can combine epoxy remover with an assortment of Screenpros other fine chemicals,
  as long as it totals $200 dollars!